Lighting testing laboratory

ENowadays, there is an increasing number of products in the lighting sector, which makes it difficult to distinguish between high-quality and low-quality products. he Asselum Laboratory with over 15 years of experience in conducting tests, performs trials for all types of users in the lighting market, always guided by the principles of impartiality and confidentiality.

Your trusted partner for your laboratory measurements

Accredited tests by ENAC under accreditation No. 1321/LE2474

Photometric testing of LED lamps, modules,
and luminaires according to UNE EN 13032-4

Through testing of all types of LED (SSL) light sources, we provide values for luminous flux, luminous efficacy, polar intensity distribution, electrical power, Unified Glare Rating (UGR), and color temperature, among others. Additionally, we provide photometric files in IES (.ies), EULUMDAT (.ldt), and OXL formats.

Color testing according to UNE EN 13032-4

Asselum has a revolutionary system for color and spectral measurement at different C and Gamma angles, enabling full compliance with the new color measurement standard for LED technology.

Técnico con tablet en la cámara oscura del laboratorio junto a una cámara de medida sobre trípode

Tests according to IES LM-80, IES TM-21, and standards
UNE-EN IEC 62717 and UNE EN IEC 62722

Lifetime testing according to IES LM-80, IES TM-21, and standards UNE-EN IEC 62717 and UNE EN IEC 62722. Estimation of LED luminous flux maintenance.

Medición con cámara termográfica FLIR de una luminaria montada en el laboratorio fotométrico
Técnico con gafas de protección junto al banco óptico durante un ensayo en cámara oscura

Testing according to ANSI/IES LM-82

Testing according to ANSI/IES LM-82 for the characterization of the optical and electrical properties of solid-state lighting products as a function of temperature.

Luminaria lineal LED suspendida y encendida durante un ensayo en el laboratorio fotométrico

Tests accredited by ENAC,
Accreditation No. 1321/LE2474

Proyector LED montado en el goniofotómetro dentro de la cámara oscura del laboratorio

Photometric testing of LED lamps, modules,
and luminaires according to UNE EN 13032-4

Through testing of all types of LED (SSL) light sources, we provide values for luminous flux, luminous efficacy, polar intensity distribution, electrical power, Unified Glare Rating (UGR), and color temperature, among others. Additionally, we provide photometric files in IES (.ies), EULUMDAT (.ldt), and OXL formats.

Técnico con bata tomando datos en la cámara oscura del laboratorio fotométrico

Color testing according to UNE EN 13032-4

Asselum has a revolutionary system for color and spectral measurement at different C and Gamma angles, enabling full compliance with the new color measurement standard for LED technology.

Medición con cámara termográfica FLIR de una luminaria montada en el laboratorio fotométrico

Tests according to IES LM-80, IES TM-21, and standards
UNE-EN IEC 62717 and UNE EN IEC 62722

Lifetime testing according to IES LM-80, IES TM-21, and standards UNE-EN IEC 62717 and UNE EN IEC 62722. Estimation of LED luminous flux maintenance.

Técnico con gafas de protección junto al banco óptico durante un ensayo en cámara oscura

Photobiological safety testing according to
UNE EN/IEC 62471 and IEC TR 62778

ENAC photobiological safety tests according to UNE EN/IEC 62471 and IEC TR 62778. Assessment of the photobiological safety of lamps and lamp systems, including luminaires.

Luminaria lineal LED suspendida y encendida durante un ensayo en el laboratorio fotométrico

Testing according to ANSI/IES LM-82

Testing according to ANSI/IES LM-82  for the characterization of the optical and electrical properties of solid-state lighting products as a function of temperature.

Diagrama polar de intensidad luminosa con el reparto porcentual del flujo por zonas

Testing according to ANSI/IES LM-79 and LM-80,
TM-21 & TM-30

Testing according to ANSI/IES LM-79 for electrical and photometric measurement of solid-state lighting products. Additional photometric tests according to LM-80, TM-21, and TM-30.

Additional Tests

Testing according to the Ecodesign Regulation,
Energy Labeling, and EPREL

In response to the entry into force of the  new Ecodesign Regulation for Lighting (EU) 2019/2020 and the Energy Labeling of Light Sources (EU) 2019/201, Asselum offers personalized technical consultancy for distributors and manufacturers in the lighting sector.

Testing of luminaires and lamps for horticulture

Asselum conducts testing for all types of horticultural light sources and measures PAR units, such as Photosynthetic Photon Flux (PPF) and Photosynthetic Photon Flux Density (PPFD).

Técnico con bata anotando datos en una tableta frente a un proyector LED de luz magenta en cámara oscura

Testing and characterization of ultraviolet (UV) optical
radiation [200–400 nm]

A fully equipped laboratory for characterizing ultraviolet (UV) radiation [200–400 nm] from lamps and light sources.

Lámpara germicida UV-C encendida emitiendo luz azul sobre un panel

Testing of lamps and luminaires
according to UNE EN 13032-1

Through testing of lamps and luminaires, we provide values for lamp flux, luminaire flux, efficiency, polar intensity distribution, electrical power, Unified Glare Rating (UGR), and color temperature, among others. Additionally, we provide photometric files in IES (.ies), EULUMDAT (.ldt), and OXL formats.

Luminaria decorativa de discos opalinos encendida sobre fondo negro

Light quality testing

Through testing of lamps and luminaires, we provide values for lamp flux, luminaire flux, efficiency, polar intensity distribution, electrical power, Unified Glare Rating (UGR), and color temperature, among others. Additionally, we provide photometric files in IES (.ies), EULUMDAT (.ldt), and OXL formats.

Chips LED COB de alta potencia en azul, blanco y rojo sobre fondo negro

Photometric Testing of Emergency Luminaires
according to UNE EN 1838:2013

For emergency lighting systems, we can provide luminous flux, decay testing, and color parameters, among others.

Additional Tests

Etiqueta energética europea de clase B junto a una tira de LED SMD ampliada

Testing according to the Ecodesign Regulation,
Energy Labeling, and EPREL

In response to the entry into force of the  new Ecodesign Regulation for Lighting (EU) 2019/2020 and the Energy Labeling of Light Sources (EU) 2019/201, Asselum offers personalized technical consultancy for distributors and manufacturers in the lighting sector.

Técnico con bata anotando datos en una tableta frente a un proyector LED de luz magenta en cámara oscura

Testing of luminaires and lamps for horticulture

Asselum conducts testing for all types of horticultural light sources and measures PAR units, such as Photosynthetic Photon Flux (PPF) and Photosynthetic Photon Flux Density (PPFD).

Lámpara germicida UV-C encendida emitiendo luz azul sobre un panel

A fully equipped laboratory for characterizing ultraviolet (UV) radiation [200–400 nm] from lamps and light sources.

Lifetime testing according to IES LM-80, IES TM-21, and standards UNE-EN IEC 62717 and UNE EN IEC 62722. Estimation of LED luminous flux maintenance.

Luminaria decorativa de discos opalinos encendida sobre fondo negro

Ensayo de lámparas y luminarias
según UNE EN 13032-1

Through testing of lamps and luminaires, we provide values for lamp flux, luminaire flux, efficiency, polar intensity distribution, electrical power, Unified Glare Rating (UGR), and color temperature, among others. Additionally, we provide photometric files in IES (.ies), EULUMDAT (.ldt), and OXL formats.

Chips LED COB de alta potencia en azul, blanco y rojo sobre fondo negro

Light Quality Testing

Light quality testing allows the assessment of photobiological risks of light sources, lamps, and luminaires in accordance with UNE EN 62471 and Directive (2006/25/EC) on the hazards of artificial optical radiation, as well as flicker analysis.

Diagrama polar de intensidad luminosa con el reparto porcentual del flujo por zonas

Emergency Luminaire Photometric Testing according to UNE EN 1838:2013

For emergency lighting systems, we can provide luminous flux, decay testing, and color parameters, among others.

Do you have any doubts?
Contact us at